Leather Repair Company

Raw Hide Base LRC59

£11

Raw Hide Base LRC59 

Raw hide base is a water based carrier for Raw Hide Dyes to dye hides like crust leathers and veg tanned leather.

  • Excellent softness.

  • Easily mix together to gain other colours.

  • Great adhesion.

  • Fantastic penetration.

    Raw Hide Base is used as a base mix to dye naked undyed leathers or can be used to restore veg tanned leathers or crust leathers that have been dyed before by adding raw hide dye into the mixture.

    Raw Hide Base must be mixed with Raw Hide Dye, the two must be mixed together to allow them to fix to the leather, you can mix the dyes together to gain any shade you wish, the shades you can create are endless.

    Raw Hide Base is mixed with raw Hide Dye at a ratio of 20% raw hide dye added to the raw hide base to make your mixture to dye leather or to revive the colour you already have. Mixing is very simple, just add to a jug place in a bottle and shake up and you ready to dye leather.

    This is an amazing product in the leather craft industry for dying leather and within the re-enactment sectors.

    A fantastic solution for medieval and historic clothing and furniture to retain patina, to restore classic and vintage items or clothing, furniture, and fashion artifacts.

Water Based Formula

Strong & Durable

Leather Safe Technology

Protective Barrier

Purpose

For dying raw hide, crust leather or veg tanned leather, can also be used to restore the colour on crusts and veg tanned items, like handbags, shoes, furniture, or even classic car interiors where no fillers are wanted or needed, or to give aging to antique furniture, production of re-enactment clothing in the sci fi, medieval and historical sectors.

Measurements

Here is a guide of how much dye you will need to add to the base sizes 50ml of base will need 10ml of dye.

100ml of base will need 20ml of dye.

250ml of base will need 50ml of dye.

500ml of base will need 100ml of dye.

1 litre of base will need 200ml of dye.

5 litre of base will need 1 litre of dye.

Instructions

Ensure the surface is dry and prepared correctly and free of dirt, grime, debris, and dust. Next you mix the raw hide base with the raw hide dye, only 20% raw hide dye is required to be added to the base, once added shake very well. Then apply in a circular motion with a sponge or pad and ensure this is rubbed in properly and then levelled out with straight line if required you need to avoid lines and streaks, once cured and dried you can seal over with soft touch finish or antique silk dressing or both.

Click below to download the MSDS Report

MSDS Report